Products › Decorative Stone Finish
Finishing

Decorative Stone Finish

Professional-grade sealers and enhancers that protect restored masonry and bring out the natural depth of brick and stone. UV-stable, breathable formulation that locks out moisture while allowing trapped vapor to escape. Designed to be the final step after cleaning and preparation.

Calculate Coverage

Key Features

Technical Specifications

FormReady-to-use liquid
ColorClear (non-yellowing)
pH7.0 - 8.0 (neutral to slightly alkaline)
Density0.95 - 1.00 g/mL
Flash Point> 60C
Freeze Point-15C
Shelf Life36 months (sealed)
VOC Content< 100 g/L (compliant)

Available Sizes

4L
SK-DF-04
3.9 kg
10L
SK-DF-10
9.8 kg

Coverage Rates

Smooth surface (1 coat)28 sq ft/L (2.6 m²/L)
Standard brick (2 coats)18 sq ft/L (1.7 m²/L)
Rough/porous stone (2 coats)11 sq ft/L (1.0 m²/L)

Coverage varies with surface porosity, texture, and application method. Test on a small area first.

Application Instructions

  1. 1

    Surface Requirement

    Surface must be clean, dry, and free of efflorescence, mortar residue, and previous coatings. Use StoneKraft Liquid Cleaner and Surface Prep first if needed. Allow 48+ hours drying after cleaning.

  2. 2

    Weather Conditions

    Apply when surface and air temperature are between 10C and 30C. Do not apply if rain is expected within 24 hours. Avoid direct sunlight during application.

  3. 3

    First Coat

    Apply a thin, even coat using a low-pressure sprayer, lambswool applicator, or brush. Work in sections, maintaining a wet edge. Avoid pooling or dripping.

  4. 4

    Between Coats

    Allow 4-6 hours between coats. Surface should be dry to the touch. A second coat is recommended for porous surfaces and maximum protection.

  5. 5

    Second Coat

    Apply perpendicular to the first coat direction for even coverage. Same technique — thin, even application without pooling.

  6. 6

    Curing

    Allow 24 hours before light foot traffic. Full cure in 72 hours. Do not wash or expose to heavy rain for 72 hours after application.

Safety Data Summary

Important: Always read the full Safety Data Sheet (SDS) before use. This summary does not replace the complete SDS document.

Hazard Statements

  • May cause mild skin irritation with prolonged contact
  • Keep away from heat/sparks/open flames

Required PPE

  • Nitrile gloves for prolonged use
  • Safety glasses
  • Ensure adequate ventilation in enclosed areas

First Aid Measures

Skin Contact

Wash with soap and water. Seek medical advice if irritation develops.

Eye Contact

Rinse with water for at least 10 minutes. Seek medical advice if irritation persists.

Inhalation

Move to fresh air. Seek medical attention if symptoms persist.

Ingestion

Rinse mouth. Do not induce vomiting. Seek medical advice.

Storage

Store between 5C and 35C. Protect from frost and direct sunlight. Keep container tightly sealed.

Disposal

Dispose in accordance with local regulations. Do not pour into drains.