Purpose-built cleaning formula for new construction masonry. Removes mortar smears, construction soiling, haze, and curing compound residue. Prepares surfaces for sealing, coating, or decorative finishing without etching or discoloration.
Calculate Coverage| Form | Ready-to-use liquid |
|---|---|
| Color | Clear |
| pH | 2.0 - 3.0 (mildly acidic) |
| Density | 1.02 - 1.06 g/mL |
| Flash Point | Non-flammable |
| Freeze Point | -5C |
| Shelf Life | 18 months (sealed) |
| VOC Content | < 25 g/L (compliant) |
| Light soiling | 22 sq ft/L (2.0 m²/L) |
|---|---|
| Standard cleaning | 15 sq ft/L (1.4 m²/L) |
| Heavy mortar/haze | 9 sq ft/L (0.8 m²/L) |
Coverage varies with surface porosity, texture, and application method. Test on a small area first.
Wait a minimum of 7 days after mortar placement before cleaning. Ensure mortar joints are fully cured.
Pre-soak the wall thoroughly with clean water. Start from the bottom and work up to prevent streaking. Surface should be saturated but not dripping.
Apply product to a manageable section (20-30 sq ft) using a low-pressure sprayer or brush. Apply from bottom to top to prevent run-down staining.
Allow 3-5 minutes. Do not let product dry on the surface. Work in shade or cooler temperatures when possible.
Agitate with a stiff nylon brush, working in circular motions. Focus on mortar smear areas and haze deposits.
Rinse immediately with large volumes of clean water from top to bottom. Use low-pressure washer (under 800 PSI). Repeat application if residue remains.
Wash with plenty of water and soap. Remove contaminated clothing. Seek medical advice if irritation persists.
Rinse cautiously with water for at least 15 minutes. Seek medical attention if irritation persists.
Move to fresh air if respiratory irritation occurs.
Rinse mouth. Drink small amounts of water. Seek medical advice.
Store in original container in a cool, dry location. Keep tightly closed when not in use.
Dispose in accordance with local, provincial, and federal regulations.